Siemens OptiPoint 410 User Manual Download Page 23

Page: 23 / 204

Operating the Telephone with the Display

Step by Step

Incoming Calls

The Telephone rings giving the set call signal

page 99.

If calling party information (name, number, or both) is
transferred, it appears in the display.

Answering a Call With the Handset

The telephone rings. The caller is displayed on the
screen.

Lift the handset.

Set call volume. To raise or lower the volume, press the
relevant key until the desired volume is set.

Answering a Call Without the Headset

(Speakerphone Mode)

The telephone rings. The caller is displayed on the
screen.

Confirm

Press key. LED lights up.
Speakerphone mode.

Adjust volume. To raise or lower the volume, keep
pressing the keys until the desired volume is set.

Notes on speakerphone mode:

•

Tell the other party that you are using speakerphone
mode.

•

The speakerphone works bests at a low receiving
volume.

If you are defining settings on the telephone
when a call arrives, the process is paused. After
the telephone conversation, the telephone auto-
matically returns you to the point in the menu
structure you were in before the call.

Refer to

page 53 for information to answer in-

coming pickup group calls.

You can’t use this function with optiPoint 410/
420 economy/economy plus

Answer call?

Loudspeaker

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands