manualshive.com logo in svg

Siemens OpenStage 60 G, Operating Manual

The Siemens OpenStage 60 G is a cutting-edge communication device that enhances productivity in the workplace. Experience seamless functionality and advanced features. Visit our website to download the operating manual for free and unlock the full potential of this remarkable product.

Share
Download
background image

OpenScape Voice functions

177

Step by Step

Silent Monitoring

If this function has been configured by service person-
nel and enabled for the destination phone, you can join 
an active call of an internal station and listen in un-
noticed (muted) or with the knowledge of the target 
station (active).

Active silent monitoring

Station A and B are on a call. You want to listen to the 
call but so that Station B does not notice but so that you 
can still talk to Station A.

•

You can hear and talk to station A.

•

You can hear station B but cannot talk to him becau-
se he cannot hear you.

•

Station A and B can hear and speak to each other.

^

Lift the handset.

j

Enter the code for active silent monitoring and the des-
tination number (see code table 

Æ

page 179).

 

You are 

connected to the call and can listen. If necessary notify 
station A.

]

End the silent monitoring unnoticed by replacing the 
handset.

Your phone

internal station A

internal or external station B

Summary of Contents for OpenStage 60 G































































































































































































































































Reviews:

No comments

Related manuals for OpenStage 60 G

NEC DS1000 Manual preview
DS1000
Brand: NEC Pages: 36
NEC DS1000 Correspondence Course Workbook preview
DS1000
Brand: NEC Pages: 174
NEC DS1000 Quick Reference Manual preview
DS1000
Brand: NEC Pages: 6
NEC DS1000 Quick Setup Manual preview
DS1000
Brand: NEC Pages: 66
NEC DS1000 Operation Manual preview
DS1000
Brand: NEC Pages: 62
Panasonic KXTGA820 - EXPND DIGITAL CORDLESS HANDSET Manual De Instalación preview
KXTGA820 - EXPND DIGITAL CORDLESS HANDSET
Brand: Panasonic Pages: 5
Olympia 4210 Operating Instructions Manual preview
4210
Brand: Olympia Pages: 28
Uniden DECT1560 Series User Manual preview
DECT1560 Series
Brand: Uniden Pages: 64
Karel MS128 Easy To Use Owner'S Manual preview
MS128
Brand: Karel Pages: 80
Uniden TRU238 Series (French) Manual D'Utilisation preview
TRU238 Series
Brand: Uniden Pages: 76
Porter-Cable 20v Max* 1/2" Lithium-IonCordless Drill/Driver Instruction Manual preview
20v Max* 1/2" Lithium-IonCordless Drill/Driver
Brand: Porter-Cable Pages: 40
OGATECH OGATECH OG-S60 User Manual preview
OGATECH OG-S60
Brand: OGATECH Pages: 144
Blaupunkt DT 04 User Manual preview
DT 04
Brand: Blaupunkt Pages: 11
AdvanceTec AdvanceCommunicator User Manual preview
AdvanceCommunicator
Brand: AdvanceTec Pages: 30
Steren TEL-2415 Instruction Manual preview
TEL-2415
Brand: Steren Pages: 12
Steren TEL-600 NE Instruction Manual preview
TEL-600 NE
Brand: Steren Pages: 119
Comdial 6010S-XX User Manual preview
6010S-XX
Brand: Comdial Pages: 61
Uniden DXI 5186-2 Series Owner'S Manual preview
DXI 5186-2 Series
Brand: Uniden Pages: 52

Brands by name

Popular brands

Load more brands