OpenScape Voice functions
173
Step by Step
Reachability
You can make either serial calls or simultaneous calls on
several sites. The features for this are
•
serial call
•
parallel call
Prerequisite:
The service personnel has configured the
respective feature for your main number in OpenScape
Voice.
Serial call
Managing number lists/activating serial call
Before the serial call number can be activated, a serial
call list much be created. This can be prepared either by
service personnel or you can create it yourself later. Up
to six numbers can be entered in the list for sites on
which incoming calls including your main number
should be signaled sequentially. Each number can con-
sist of up to 30 digits.
^
Lift the handset.
j
Enter the code for the edit mode (see code table
Æ
page 179).
The edit mode opens and you hear an announcement
with the following information:
•
Feature name
•
Current status (active/inactive)
•
Number of numbers currently on the serial call list
You are prompted to do one of the following:
•
Activate/deactivate the feature (only if numbers are
already entered in the list)
•
Call up the numbers currently entered in the list.
•
Add or delete numbers
•
Repeat the options in edit mode
If the serial call list is still empty, you are prompted to
enter numbers in the list. As soon as you have entered
a valid number, the serial call can be activated.
If the serial call is activated, incoming calls are first rout-
ed to your phone. If you do not answer within the time-
frame defined by the service personnel, the next desti-
nation phone rings for the configured period of time.
