manualshive.com logo in svg

Siemens OpenStage 60 G, Operating Manual

The Siemens OpenStage 60 G is a cutting-edge communication device that enhances productivity in the workplace. Experience seamless functionality and advanced features. Visit our website to download the operating manual for free and unlock the full potential of this remarkable product.

Share
Download
background image

Mobility function

163

Step by Step

Logging on with forced, delayed logoff at a 

remote phone

If the remote phone is busy and your service personnel 
enabled "Forced logoff during call" with a set timeout, 
forced logoff does not occur until this timeout expires.

Logon via a key

If a program key is configured for Mobility.

S

Press the "Mobility" program key. 

or

Logon via the context menu

Select and confirm the option shown in the idle display 
context menu 

Æ

page 33. 

You are prompted to enter your mobility ID. 

j

Enter and confirm mobility ID – usually a phone number.

You are prompted to enter the password.

j

Enter and confirm the user password. 

The following mobility messages appear in the display:
•

Validating

•

Logging off elsewhere

•

Registering

•

Downloading user data

Once logon is complete, the "Mobility" program key 
LED lights up and the mobility icon appears in the gra-
phic display 

.

Mobile logon

Mobility ID

Enter password

At the same time, the graphic display on the 
busy remote phone shows "Forced logoff 
pending".  After the set timeout the active call is 
ended and remote logoff is performed.

Summary of Contents for OpenStage 60 G































































































































































































































































Reviews:

No comments

Related manuals for OpenStage 60 G

NEC ESERIES Instruction Manual preview
ESERIES
Brand: NEC Pages: 3
Panasonic KX-TG8070E Quick Manual preview
KX-TG8070E
Brand: Panasonic Pages: 8
Panasonic KX-TG7331FX Quick Manual preview
KX-TG7331FX
Brand: Panasonic Pages: 10
Panasonic KX-TG6021 Operating Instructions Manual preview
KX-TG6021
Brand: Panasonic Pages: 56
Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID Owner'S Manual preview
2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID
Brand: Radio Shack Pages: 16
Vega C-2002 Technical Manual preview
C-2002
Brand: Vega Pages: 60
3SIXT SNAP STICK User Manual preview
SNAP STICK
Brand: 3SIXT Pages: 6
Binatone Lyris 710 User Manual preview
Lyris 710
Brand: Binatone Pages: 32
UCOM COCOON 8002 User Manual preview
COCOON 8002
Brand: UCOM Pages: 24
Sony Ericsson CAR100 User Manual preview
CAR100
Brand: Sony Ericsson Pages: 2
Panasonic KXTSC55B - PHONE/ANSWER MACHINE User Manual preview
KXTSC55B - PHONE/ANSWER MACHINE
Brand: Panasonic Pages: 68
ETVAX 40510 Quick Manual preview
40510
Brand: ETVAX Pages: 64
invotel SX8600 User Manual preview
SX8600
Brand: invotel Pages: 8
Doro COMFORT 1000 Manual preview
COMFORT 1000
Brand: Doro Pages: 40
Doro 430 Manual preview
430
Brand: Doro Pages: 160
VTech VS122-16 Quick Start Manual preview
VS122-16
Brand: VTech Pages: 2
VTech v 2651 User Manual preview
v 2651
Brand: VTech Pages: 53
VTech TR1-2013 User Manual preview
TR1-2013
Brand: VTech Pages: 84

Brands by name

Popular brands

Load more brands