manualshive.com logo in svg

Siemens OpenStage 60 G, Operating Manual, Page: 125 / 254

Share
Download
Siemens OpenStage 60 G Operating Manual Download Page 125

Making calls with multiple lines

125

Step by Step

Second call

Prerequisite

: "Allow call waiting" is activated. 

If "Sekretary 1" receives a second call, this can be ac-
cepted, ignored, forwarded or rejected. Detailed infor-
mation on this can be found from 

Æ

page 95. 

If the second call was answered, it can be forwarded 
using consultation or the direct station selection keys. 

Connecting a call

If e. g. the "Sekretary 1" answered a call, it can forward 
the call using the direct station selection keys to the fol-
lowing telephones:

•

Executive 1

•

Executive 2

•

Sekretary 2.

The following examples show connections to 
"Executive 1".

Connecting with consultation

S

Press the DSS "Executive 1" key. "Executive 1" answers. 
Announce the call.

\

 or 

n

 or 

o

Press the hang-up, loudspeaker or headset key.

Connecting without consultation

S

Press the DSS "Executive 1" key. "Executive 1" does not 
answer.

Select and confirm the option shown in the pop-up me-
nu.

\

 or 

n

 or 

o

Press the hang-up, loudspeaker or headset key. The 
"Executive 1" phone rings.

If "Sekretary 1" is busy, the call is forwarded im-
mediately to "Sekretary 2" if:
•

a consultation call is being made or 

•

"Allow call waiting" is deactivated. 

You can also select "Complete Xfer" from the con-
text ment.

Complete transfer

Summary of Contents for OpenStage 60 G































































































































































































































































Reviews:

No comments