manualshive.com logo in svg

Siemens NK8222, Installation Function & Configuration Commissioning Safety Regulations

Share
Download
Siemens NK8222 Installation Function & Configuration Commissioning Safety Regulations Download Page 72

Maintenance and diagnostics 

9 

The NW8204 maintenance and diagnostic tool

72 
Building Technologies 

 

A6V10062437_a_en

Fire Safety & Security Products 

 

30.06.2013

 

 

Note: NK823x MP4.40 or later firmware is required. 

Read PIC24FW Ver  
Reads the PIC24 microcontroller firmware version. 

 

 

Note: NK823x MP4.40 or later firmware is required. 

Read WDT Status  
Reads the NK823x watchdog status (enabled or disabled). 

 

 

Note: NK823x MP4.40 or later firmware is required. 

Read Mass Storage  
Reads a mass storage device (USB mass storage device or SD card) available on the 

NK823x unit. Right-click the icon of the connected mass storage device (the icons 

display in the box at right) to show the available commands: 

   Show info: show information about the connected mass storage device. 

   Unmount: command needed to safely remove the mass storage device. 

   Set as Log storage: set the selected device (USB mass storage device or SD 

card, if both are available on the system) as the active storage device. 

Set Default Log  
Restores the NK823x log settings as set in Composer. 
Protocol Info  
Opens the NK Protocols window, which allows to configure the NK823x logging on the 

fly (see Using log files [➙ 75]). 
Read Logging Status  
Reads the NK823x logging status: Active, Inactive, Active (Modified) after on-the-fly 

configuration changes have been set. 
Read Firewall Status  
Reads the NK823x firewall status: Enabled, Disabled. 
Read Routing Status  
Reads the NK823x routing status: Enabled, Disabled. 

9.4.4

 

Uploading diagnostic files 

Diagnostic file purposes 

The purpose of these files is to record messages of what has taken place with the 

NK8000 to make it easier to determine if something is wrong, or if something important 

has taken place. 

Diagnostic file description 

DIAGNO.LOG  

Summary of Contents for NK8222



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands