Changes to previous version
MAMMOMAT Balance
SPB7-115.840.01 Page 62 of 62
Siemens AG
Troubleshooting Guide
Rev.02 10.04
Medical Solutions
Changes to Previous Version
Chapter
Page
Change
Control LEDs
8
...
bright fix during grid movement.
Control LEDs
8
Filament power supply PCB 92-073
Operating Errors On
Display
16
NOT ACTIVE
Technical menu;
Rotating anode
92-074 >> FAIL <<
19
…of jumpers on CN5 PCB 01-170 or flat cable CV0174.
Picture changed
Technical menu;
Inverter
20
Led DL1
...of Jumpers on CN3 PCB 01-170
Picture changed
...Vdc (in)= 000 then F3 of PCB…
Technical errors in
LOG file
20
Better text and images to download last 1300 events from mammo
List of Error Codes
22
NOT ACTIVE
Calibration of
protection circuit
23
Picture changed
Anode current
calibration
29
To enter
mAL
current calibration set
DIP2 of
SW1
Accessing the
program
39
Creation of a new Dosemeter file removed: change in text and images
Radiation table
43
...
in a "kV" versus reference dose grid. Any row…
Dosemeter
configuration
45
Picture of Dosemeter configuration window changed.
Dosemeter
configuration
46
...
display pushing, in Manual Mode, the BELL…
FOCAL SPOT DISTANCE
Introduction
51
…refer to Operator’s manual
SPB7-115.620.01…
Configuration of
maximum
compression force
51
... correction factor from 1 to 20 that will…
Brake force
adjustment
52
Better text and image