manualshive.com logo in svg

Siemens HiPath Xpressions, User Manual, Page: 33 / 278

Share
Download
Siemens HiPath Xpressions User Manual Download Page 33

A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual

2-17

    

   

   

Mailbox Processing on the PC and the E-Mail Service

Microsoft Outlook in Internet Mail Operation

2.4

Microsoft Outlook in Internet Mail Operation

The descriptions in this chapter are based on Microsoft Outlook 2000. Using Outlook 2000 
(Outlook XP) makes it possible for the first time ever to operate Internet mail via IMAP2002 at 
the same time as an Exchange connection (for further information on this, see Section 2.5). 

2.4.1

System Requirements

●

Microsoft Outlook 98, version 8 or higher, or Outlook 2000.

●

Microsoft Outlook 98/2000 must be installed with the 

Internet Only

 option.

●

Your PC must be equipped with a sound card, microphone, loudspeakers/headset and 
the relevant playback software to allow voice messages to be processed on your PC. 

●

The relevant graphics software must be installed on your PC to allow fax messages to 
be viewed. A graphics format that is supported by the user’s graphics software can be 
set for each individual user.

2.4.2

Setting up an Account in MS Outlook (Internet Operation)

See Microsoft Outlook Express Section 2.3.2, “Setting up an Account in Microsoft Outlook Ex-
press”.

Summary of Contents for HiPath Xpressions























































































































































































































































































Reviews:

No comments