manualshive.com logo in svg

Siemens HiPath Xpressions, User Manual, Page: 220 / 278

Share
Download
Siemens HiPath Xpressions User Manual Download Page 220

Mailbox Processing on the Telephone and the Voice Mail Service

For internal use only

 A31003-S2330-B690-2-7619, January 2003

3-60

HiPath Xpressions V3.0, User Manual

   

   

   

vms.fm

Operating your Mailbox using VMS

3.3.2.7

Recording a Dictation

You can record dictations using the VMS system and send each dictation to a different user.

Select 2 in the main menu to record a dictation (see Section 3.3.2.4, “Options in the Main Menu 
(Direct Access)”):

Selection options for recording and sending a dictation

The following options are available for recording dictations:

5

Status query (play back message header):

Push 5.

8

Extend the request:

Push 8.

#

Delete message:
Push the pound key.

1

Send new message:
Push 1.

>

Note:

Special privileges are required for recording and receiving dictations. These privileg-
es are assigned by the system administrator.

*

Enter the mailbox number:

Enter the mailbox number and conclude the entry by pushing the star 
key.

#

If the entry was incorrect: Delete the call number entered:

Push the pound key. You can resume the process of entering the recip-
ient call number immediately afterwards.

Summary of Contents for HiPath Xpressions























































































































































































































































































Reviews:

No comments