Siemens HiPath Xpressions User Manual Download Page 217

Page: 217 / 278

vms.fm

A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual

3-57

For internal use only

Mailbox Processing on the Telephone and the Voice Mail Service

Operating your Mailbox using VMS

Special send options:

Special delivery options:

Push 5.

Quit message recording and start delivery:

Push the star key.

Cancel the entire process and return to the main menu:

Push 0 and then push the star key.

Request read receipt:

Push 1.

Mark message as "Private":

Push 2.

Mark message as "Urgent":

Push 3.

Request future delivery:

Push 4.

Enter the required time of delivery:

Enter the delivery time and push the star
key to conclude the entry.

If the entry was incorrect: delete the delivery time:

Push the pound key. You can resume the process of entering
the time of delivery immediately afterwards.

Send the message again:

Push 5.

Send the message again in one week:

Push 1.

Send the message again in one month:

Push 2.

Confirm and return to the previous menu:

Push the star key.

Delete and return to the previous menu:

Push the pound key.

Confirm and return to the previous menu:

Push the star key.

Delete and return to the previous menu:

Push the pound key.

Summary of Contents for HiPath Xpressions























































































































































































































































































Search results

Summary of Contents for HiPath Xpressions

Reviews:

Siemens HiPath Xpressions, User Manual, Page: 217 / 278

Search results

Summary of Contents for HiPath Xpressions

Reviews: