Siemens HiPath Xpressions User Manual Download Page 231

Page: 231 / 278

vms.fm

A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual

3-71

For internal use only

Mailbox Processing on the Telephone and the Voice Mail Service

Operating your Mailbox using VMS

Define and change the password

Configure notification feature

Select special functions in main menu:

Push 8.

To define or change the password:

Push 4.

Delete password (may be limited to users with special privileges):

Push the pound key.

Enter password and confirm entry:

Enter a digit sequence and push the star key to conclude the entry.

If the entry was incorrect: delete the password entered:

Push the pound key. You can resume the process of entering the pass-
word immediately afterwards.

Cancel the entire process and return to the main menu:

Push 0 and then push the star key.

Select special functions in main menu:

Push 8.

Select notification feature:

Push 5.

Configure "User outcall" notification:

Push 1.

Configure SMS notification:

Push 2.

Quit the function and return to the "Special Functions" menu:

Push the star key.

Cancel the entire process and return to the main menu:

Push 0 and then push the star key.

Summary of Contents for HiPath Xpressions























































































































































































































































































Search results

Summary of Contents for HiPath Xpressions

Reviews:

Siemens HiPath Xpressions, User Manual, Page: 231 / 278

Search results

Summary of Contents for HiPath Xpressions

Reviews: