Setting into operation
14
Setting into operation
This chapter describes how to connect the individual elements of
the HiNet LP5100 with each other and how to set up the unit ready
for operation.
The network administrator is in charge of making the connection
to LAN and of setting of the ambient variables, as described in the
chapter "Settings".
Installing the telephone
Proceed as follows to connect the elements of the telephone with
each other:
●
Latch the Western plug of the handset cord in the handset
receptacle.
●
Latch the other end of the cord in the receptacle (3) on the
bottom of the telephone.
●
Feed the cord through the guide channel in the base unit.
●
Latch the LAN cord with the eight-pin Western plug (RJ 45) in
the receptacle (2) on the bottom of the telephone, and connect
with LAN.
●
Feed the LAN cord through the guide channel in the base unit.
The two cable ends of the handset cord are equipped
with identical four-pin Western plugs (RJ 11).
