Setting into operation
17
HiNet system without DHCP server
If there is no DHCP server integrated into your HiNet environment,
you have to enter the IP address manually via your dialing keypad.
When DHCP is set off and the terminal does not have a configured
IP at start up, the screen "No IP address" is displayed. You have
to enter the admin menu and configure it manually. This will re-
quire a restart to take effect.
The following display will appear:
Having entered the IP address, you have to enter your own tele-
phone number:
If the HiNet password is not yet configured you will be prompted:
After your own telephone number has been entered, the telepho-
ne will change over to its normal operating mode (Basic menu).
You can now receive and make calls.
If there is an SNTP server integrated into your HiNet environment,
the date and time are automatically loaded to the telephone. If the-
re is no SNTP server, you have to set the date and time manually.
For more details on this, please read the chapter "Settings".
Enter admin password
******
Enter the administrator
pasword and
confirm
Enter IP Addr
000.000.000.000
Enter the IP address as-
signed to this telephone
and use
Enter IP Addr
128.098.053.008
to confirm the IP ad-
dress
Enter E164
_
Enter the telephone
number assigned to this
telephone and use
Enter E164
1228
to confirm the input
number
Enter Hinet password
******
Enter the HiNet pasword
and
confirm
LP5100
Initialising...
Vxx.yy
>
13:15
Page forward with
20.06.98
>
Basic menu
