Display and operator’s controls
13
Programmable keys
The HiNet LP5100 is equipped with 16 user-programmable keys
in two levels, with four of these keys being preassigned in the first
level:
If you press one of these keys, the corresponding LED will go on
until the preprogrammed function is carried out.
If you call a key from the second level, press the "Shift" key first
and then the required function key.
Control keys
The two control keys
and
are located below the dialing key-
pad. Depending on the operating mode, you can vary the following
settings:
LED off
LED on
Operating mode
key
key
Receiving a call
Reduce the volume
of the ringer tone
Increase the volume
of the ringer tone
Handsfree talking
Reduce the volume
of the loudspeaker
in the base unit
Increase the volume
of the loudspeaker in
the base unit
Using the handset
to telephone
Reduce the volume
of the handset
loudspeaker
Increase the volume
of the handset
loudspeaker
Setting in the menu
"Service"/"Audio
Settings"
Adjust loudspeaker, handset, key click and
ringer volumes,
vary the sequence and melody of the
ringer tone
