Settings
52
I/C call display
This function allows you to select the default CLI (calling line iden-
tification) information to be displayed on an incoming call. The pri-
ority order is name, number and IP. If the relevant information is
not available, the next in priority is shown. If you don’t want any
CLI information, you can select the "No Display" option.
Daylight saving
Use this function to indicate that daylight saving applies.
Service:
2=configuration?
>
Call "Configuration"
Go to "I/C call display"
Configuration:
11=I/C call display?
Number
>
Confirm your choice
("Number" is active)
I/C call display:
02=Number?
Number
>
Go to "IP address"
and
confirm
Configuration:
11=I/C call display?
IP
>
The switchover is
displayed
If set this adds one hour to the timezone offset defined
in the administration menu.
Service:
2=configuration?
>
Call "Configuration"
Go to "Daylight saving"
Configuration:
12=Daylight saving?
On
>
Confirm your choice
("Daylight saving" is on)
Daylight saving:
Switch over?
On
>
Confirm to switch off
"Daylight saving"
Configuration:
12=Daylight saving?
Off
>
The switchover is
displayed
