Siemens Gigaset SX670 isdn User Manual Download Page 62

Page: 62 / 85

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 7.11.07

ion 4,

.09.

2005

Base

ISDN

Configure

MSN

(system PIN if necessary)

Select MSN, e.g.

MSN 1

§Edit§

Press the display key.

Enter number (max. 20 digits)

(without area code = prefix).

s ~

If necessary, scroll to the first

line and enter the name (max.

16 digits) (optional).

§Save§

Press the display key.

Deleting an MSN

Base

ISDN

Configure

MSN

(system PIN if necessary)

Select MSN, e.g.

MSN 1

§Delete§

Press the display key.

If the MSN you have deleted was the send

MSN (page 62) of an internal subscriber

then a new send MSN (the MSN with the

lowest ranked number) will automatically

be assigned to this internal subscriber.

Assigning an MSN

You can assign individual MSNs to the reg-

istered devices. This determines

which number makes a registered ter-

minal ring (receive MSN),

under which number an internal sub-

scriber dials (send MSN).

Assigning a receive MSN

If you only want to assign the handset spe-

cific incoming MSNs:

Open the list of internal sub-

scribers.

Select internal number for the

handset, e.g.

INT 1

§Options§

Open menu.

Config. Device

Select and press

§OK§

If required, enter PIN and press

§OK§

Receive MSN

Select and press

§OK§

Select MSN and press

§OK§

e.g.

MSN 1

Press

and

hold

(idle status).

Assigning a send MSN

You can define one send MSN for each

internal subscriber. This MSN is shown to

the person you call and the call is also

charged to this MSN.

Open the list of internal

subscribers.

Select internal number,

e.g.

INT 1

§Options§

Open menu.

Config. Device

Select and press

§OK§

If required, enter PIN and press

§OK§

Send MSN

Select and press

§OK§

Select MSN and press

§OK§

e.g.

MSN 1

Press

and

hold

(idle status).

Setting up a busy signal for
when the MSN is being used
(Busy on Busy)

This setting allows callers to get a busy

tone immediately when an external call is

already being made on this MSN, irrespec-

tive of the

Call Waiting

setting (page 63).

Base

ISDN

Busy on Busy

Select and press

§OK§

(

‰

= on).

Summary of Contents for Gigaset SX670 isdn






















































































Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands

Siemens Gigaset SX670 isdn, User Manual

Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands