Siemens Gigaset SX670 isdn User Manual Download Page 37

Page: 37 / 85

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 7.11.07

ion 4,

.09.

2005

Incoming message list

The incoming message list contains:

All SMS messages with an MSN that

matches a send or receive MSN for your

handset. If no MSNs have been set up,

all SMS messages received are shown

on all handsets. The most recent SMS

appears at the top of the list.

SMS messages that could not be sent

due to an error.

New SMS messages are signalled on all

Gigaset S67H handsets by the

icon in

the display, the flashing message key

and an advisory tone.

Opening the incoming message list with

the

key

Press.

The incoming message list is displayed as

follows (example):

bold:

number of new entries

regular:

number of read entries

Open list with

§OK§

An entry in the list is displayed as in the

following example:

Opening the incoming message list via the

SMS menu

Incoming

Reading or deleting individual SMS

messages

Open the incoming message list.

Continue as described in "Reading or

deleting individual SMS messages",

page 35.

After you have read a new SMS, it is given

the status "Old" (is no longer shown in

bold).

Deleting the incoming message list

All

new and old

SMS messages in the list

are deleted.

Open the incoming message list.

§Options§

Open

menu.

To continue, see "Deleting draft mes-

sage list", page 36.

Replying to or forwarding text

messages

Read the SMS (page 37):

§Options§

Press the display key.

You have the following options:

Reply

Write and send a reply SMS directly

(page 34).

Edit

Edit the text in the SMS and then send

it (page 35).

Forwarding an SMS

You are reading an SMS (page 37):

§Options§

Press the display key.

Forward

Select and press

§OK§

. For fur-

ther information, see page 35.

Copying a displayed number to the

directory

Copying the sender's number

Open the incoming message list and

select entry (page 37).

§Options§

Press the display key. For fur-

ther information, see page 28.

Copying/dialling numbers from an SMS

text

Read the SMS (page 37) and scroll to

the telephone number.

SMS: (2)

1234567890

21.11.07 09:45

Please note:

– You can create a special directory for SMS

messages within your main directory by

putting a star (*) before the names.

– An attached mailbox identifier is added to

the directory.

Summary of Contents for Gigaset SX670 isdn






















































































Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands

Siemens Gigaset SX670 isdn, User Manual

Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands