Siemens Gigaset SX670 isdn User Manual Download Page 41

Page: 41 / 85

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 7.11.07

ion 4,

.09.

2005

SMS troubleshooting

Error codes when sending

Self-help with errors

The following table lists error situations

and possible causes and provides notes on

troubleshooting.

E0 Calling Line Identification permanently

withheld (CLIR) or Calling Line

Identification not activated.

FE Error occurred during SMS transfer.
FD Connection to SMS centre failed; see self-

help.

You cannot send messages.
1. You have not requested the CLIP service

(Calling Line Identification Presentation).

Ask your service provider to enable this

service.

2. SMS transmission has been interrupted

(e.g. by a call).

Re-send the SMS.

3. Network provider does not support this fea-

ture.

4. No number or an invalid number is entered

for the SMS centre set as the active send

service centre.

Enter the number (page 39).

You receive an incomplete SMS.
1. Your phone's memory is full.

Delete old SMS messages (page 37).

2. The service provider has not yet sent the

rest of the SMS.

You have stopped receiving SMS messages.

Call diversion is activated with

When: All Calls

or the

All Calls

call diversion is activated for

the network mailbox.

Change the call diversion

The message is played back.
1. The "display call number" service is not acti-

vated.

Ask your service provider to activate this

function (chargeable).

2. Your mobile phone operator and your fixed

network SMS service provider have not

agreed on a co-operation.

Obtain information from your fixed net-

work SMS service provider.

3. Your terminal has been recorded by your

SMS provider as having no fixed network

SMS functionality, i.e. you are no longer

registered with the provider.

Start the registration wizard for auto-

matic registration (see page 34).

Have the device (re-)registered to

receive SMS messages.

Messages are only received during the day.

The terminal is recorded in your SMS pro-

vider's database as having no fixed network

SMS functionality, i.e. you are no longer

registered with the provider.

Start the registration wizard for auto-

matic registration (see page 34).

Obtain information from your fixed net-

work SMS service provider.

Have the device (re-)registered to

receive SMS messages.

Summary of Contents for Gigaset SX670 isdn






















































































Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands

Siemens Gigaset SX670 isdn, User Manual

Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands