Siemens Gigaset SX670 isdn User Manual Download Page 45

Page: 45 / 85

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 7.11.07

ion 4,

.09.

2005

Deleting messages

You can either delete all old messages

together or individually.

Deleting all old messages

During playback or pause:

§Options§

Press the display key.

Del All Old Msgs

Select and press

§OK§

§Yes§

Press the display key to con-

firm the prompt.

Deleting individual old messages

During playback or pause:

§Delete§

Press the display key.

Picking up a call from the answer

machine

You can pick up a call while the answer

machine is recording or is being operated

via remote operation:

§Accept§

Press the talk or display key.

Recording stops and you can speak to the

caller.
If 2 seconds of the call have already been

recorded when you pick it up, the call will

be displayed as a new message. The

key on the handset flashes.
You can accept the call even if it is not sig-

nalled on the handset.

Diverting an external call to the answer

machine

If the MSN of the called handset is also

assigned to the answer machine, you can

forward an incoming external call to the

answer machine, even if it is switched off.

Precondition:

Sufficient memory space is

available on the answer machine.

An external call is signalled on the hand-

set:

§Options§

Open

menu.

TAD Diversion

Select and press

§OK§

The answer machine starts immediately in

recording mode and records the call. The

set time for the call acceptance (page 46)

is ignored.

Activating/deactivating two-way

recording

You can record an

external

call with the

answer machine.

Inform the caller that the call is being

recorded.

§Options§

Open

menu.

Two Way Record

Select and press

§OK§

The two-way recording is indicated on the

display by an advisory text and is added to

the answer machine list as a new mes-

sage.

§End§

Press the display key to stop

the two-way recording.

The maximum recording time depends on

the memory available on the answer

machine. If the memory is full you will

hear an end tone, the recording is

aborted, and the call recorded up to that

point is listed in the answer machine list as

a new message. If the answer machine

was in

Ans. & Record

mode, it will switch to

the

Announce Only

mode. You will receive

an instruction to delete old messages.

Delete old messages.

The answer machine

automatically

switches back to the set mode once dele-

tion is complete.

Summary of Contents for Gigaset SX670 isdn






















































































Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands

Siemens Gigaset SX670 isdn, User Manual

Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands