Siemens Gigaset SX670 isdn User Manual Download Page 71

Page: 71 / 85

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 7.11.07

ion 4,

.09.

2005

Service (Customer Care)

We offer you support that is fast and tai-

lored to your specific needs!
Our Online Support on the Internet can be

reached any time from anywhere:
www.siemens.com/gigasetcustomercare

It provides you with 24/7 support for all

our products. It also provides a list of FAQs

and answers plus user guides and current

software updates (if available for the prod-

uct in question) for you to download.
You will also find the FAQs and answers in

the appendix to this user guide.

Personal advice on our range of

products is available on our

Premium Hotline:
XXXXXXXXXXXXXXX

You can talk to qualified technicians who

will guide you expertly through product

information and installation.
If your Siemens device needs to be

repaired or if you have a guarantee or war-

ranty claim, you can get fast, reliable help

from our Service Centres.

XXXXXXXXXXXXXXXXXXXXXX

Please have your proof of purchase ready

when calling.
Replacement or repair services are not

offered in countries where our product is

not sold by authorised dealers.

Approval

This device is intended for use as an ISDN

telephone in the German network.
Country-specific requirements have been

taken into consideration.
We, Siemens Home and Office

Communication Devices GmbH & Co. KG,

declare that this device meets the

essential requirements and other

relevant regulations laid down in

Directive 1999/5/EC.

A copy of the 1999/5/EC Declaration of

Conformity is available online at:

http://www.siemens.com/gigasetdocs.

Warranty certificate

XXXXXXXXXXXXXXXXXXXXXXXX

Specifications

Recommended batteries

Technology:

Nickel-metal-hydride (NiMH)

Size:

AAA (Micro, HR03)

Voltage:

1.2 V

Capacity: 600–1200 mAh
We recommend the following battery

types, because these are the only ones

that guarantee the specified operating

times, full functionality and long service

life:

Sanyo NiMH 800

GP 850 mAh

Yuasa Technologies AAA 800

The device is supplied with two recom-

mended batteries.

Handset operating times/charging

times

The operating time of your Gigaset

depends on the capacity and age of the

batteries and the way they are used.

(All times are maximum possible times

and apply when the display backlight is

switched off).

Summary of Contents for Gigaset SX670 isdn






















































































Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands

Siemens Gigaset SX670 isdn, User Manual

Search results

Summary of Contents for Gigaset SX670 isdn

Reviews:

Related manuals for Gigaset SX670 isdn

Brands by name

Popular brands