Siemens Gigaset S675 IP Manual Download Page 102

Page: 102 / 254

100

Operating the base station answering machine

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 14.05.2009

ion 8,

.09

.200

Playing back announcements

Voice Mail

Local AM

Announcements

Play Announcement

Play Ann Only

If you have not recorded a personal announcement, the relevant pre-recorded

announcement is played.

Record a new announcement while playing back the announcement:

§New§

Press the Display key. For further information,

Page 99

Deleting announcements/advisory messages

Voice Mail

Local AM

Announcements

Del. Announcement

Del Ann Only

§Yes§

Press the Display key to confirm the prompt.

Press

and

hold

(idle status).

Once you have deleted your announcement, the relevant pre-recorded

announcement is used again. You cannot delete the pre-recorded announce-

ments.

Playing back messages

New messages that have not yet been heard are indicated by the

icon in the

display and by the

key flashing on the handset.

You can start to play back the messages in two ways:

Open the Answering Machine list with the Message key.

If the answering machine is set for fast access (

Page 105

): press and

hold

key

Listening to messages via the Answering Machine list

Prerequisite:

At least one of your handset's send/receive numbers matches the

receive number of a stored message.
The date and time of each message is logged in the Answering Machine list

(provided it has been set,

Page 16

) and displayed during the playback. If

Caller ID is activated, the caller's number or name is displayed. If the caller's

number is saved in the directory, their name is displayed.

Press the Message key.

Ans M.

Select and press

§OK§

An announcement informs you if there are new or old messages.
If there are new messages, playback begins with the first new message. If the

message has been saved with the date and time, you will hear an appropriate

announcement before playback begins. All messages are played back regard-

less of the receive number.

Please note

All messages are played back regardless of their receive number.

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands