Siemens Gigaset S675 IP Manual Download Page 101

Page: 101 / 254

Operating the base station answering machine

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 14.05.2009

ion 8,

.09

.200

Activation

Select

Off.

Save changes with

§Save§

If the messages memory is full and

Activation On

has been selected, saving is

interrupted and you will receive an instruction to delete old messages.

Delete old messages and repeat the setting.

As soon as you change the announcement mode (

Page 98

), the

Ans Mode

Time

function is automatically deactivated. You may have to reactivate it if

required.
If you do not enter a time for

From

Until

Ans Mode Time

will still be activated but

the machine will not switch to announcement mode.

Recording a personal announcement/advisory message

Pre-recorded announcements are stored in your telephone for both announce-

ment modes. The pre-recorded announcements are used if there is no personal

announcement for the mode concerned.

Voice Mail

Local AM

Announcements

Rec. Announcement

Record Ann Only

§OK§

Press the Display key to start the recording.

When the recording starts, the handset changes to speaker mode. You hear the

ready tone (short tone).

Now speak your announcement (at least 3 seconds).
Use

”

to cancel recording and

§OK§

to restart the recording process.

The recording is canceled if the answering machine memory is full.

Delete old messages and repeat recording if required.

Stop recording:

§End§

Press the Display key.

After recording, the announcement is played back for you to check.
You can re-record the announcement with

§New§

You can cancel playback by pressing

”

Please note

Recording ends automatically if the maximum recording time of 170 sec-

onds is exceeded or there is a break in speech for more than 2 seconds.

If you cancel the recording, the previously recorded announcement is

deleted. The pre-recorded announcement is used again.

The recording is canceled if the answering machine memory is full.

Delete old messages and repeat recording if required.

If an external call is received during a recording for one of the handset's

receive numbers, the recording is interrupted and the call is signaled on the

handset.

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands