189
Setting the phone with the PC
S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 14.05.2009
Ve
rs
ion 8,
03
.09
.200
8
mum 74 characters). The time server "europe.pool.ntp.org" is set as default
on the base station. You can overwrite the setting.
¤
From the
Country
list, select the country in which your base station is being
operated.
¤
The
Time Zone
field shows the valid time zone for the
Country
. It shows the
deviation between local time (not daylight saving time) and Greenwich
Mean Time (GMT).
If a country is divided into various time zones, they will all appear in the list.
Select the appropriate
Time Zone
for the base station from the list.
¤
The
Automatically adjust clock to summer-time changes
field is displayed if your
time zone differentiates between daylight saving time and standard time.
Select
On
to change the time automatically to daylight saving time or stand-
ard time when daylight saving time begins and ends respectively.
Select
Off
if you do not want to change to daylight saving time.
Please note:
If the date and time are updated by a time server that automat-
ically switches between daylight saving time and standard time, you must
always select
Off
here.
¤
Select the
Set
button to save the settings in your phone.
Once you have activated synchronization, the time and date are compared with
a time server as soon as an Internet connection is established.
Synchronization will usually occur once a day (at night) if synchronization is
activated. Any additional synchronization will take place only after each new
system start of the base station (e.g. after a firmware update or a power cut).
If you register a new handset on your base station it will assume the time and
date of the base station without any additional synchronization with the time
server.
Date and time settings are transferred to every handset after synchronization.
Please note
u
The default time server "europe.pool.ntp.org" will remain stored in the base
station even if you overwrite it. If you delete your time server from the
Time
Server
field and synchronization is still activated, the base station will con-
tinue to synchronize with the default time server. However, it will no longer
appear in the
Time Server
field.
u
If you have entered your own time server in the
Time Server
field and the
base station is unable to synchronize for ten consecutive attempts, the base
station will synchronize with the default time server.
u
If you have deactivated synchronization with a time server, and if the date
and time are not set on any handset, then the base station will attempt to
reference date and time settings from the CID information of an incoming
call.
