Siemens Gigaset S675 IP Manual Download Page 141

Page: 141 / 254

139

Making VoIP settings

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 14.05.2009

ion 8,

.09

.200

Select country and press

§OK§

Select your VoIP provider and press

§OK§

Your VoIP provider data is downloaded and saved in your phone.
If only one provider is available, the countries and providers lists are not dis-

played. Only the name of this provider will then appear in the display. To start

the download, confirm with

§OK§

If your VoIP provider is not included in the list, you need to enter or adjust the

general VoIP settings manually via your phone's Web configurator,

Page 157

Automatic update for the VoIP provider settings

After the first download of the VoIP provider settings, your phone will check

daily whether a newer version of the file for your VoIP provider is available via

the Internet on the Gigaset configuration server. If this is the case, the message

New profile available

is displayed when the handset is in idle status, and the Mes-

sage key

flashes.

Press the Message key.

§Yes§

Press the Display key to confirm the prompt.

Enter the system PIN and press

§OK§

The new data for your VoIP provider is downloaded and saved on the phone.

If you respond to the prompt with

§No§

, the display will not be repeated. The

message

New profile available

will only be shown again if a newer version of the

VoIP settings than the one rejected is available.

Entering/changing VoIP user data

You must complete the VoIP settings with your personal data. You will receive

all necessary data from your VoIP provider.

Telephony

VoIP

(Enter system PIN)

Provider Registr.

Change multiple line input:

Username:

Enter the user name (caller ID) for your VoIP provider account.

Username

often identical to your Internet telephone number (the first part of your SIP

address,

Page 159

Please note

If an error occurs during the download, an error message is displayed. You can

find possible messages and measures in the table on

Page 191

Please note

When making these entries, please remember the VoIP user data is case sensi-

tive. To enter text

Page 203

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands