105
Operating the base station answering machine
S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 14.05.2009
Ve
rs
ion 8,
03
.09
.200
8
Configuring the answering machine for fast access
You can assign the local answering machine or one of your network mailboxes
to key
for fast access (
). This setting is handset-specific.
Configuring the local answering machine for fast access
Prerequisite:
At least one of your handset's send/receive numbers matches a
receive number of the answering machine.
v
¢
Ð
¢
Voice Mail
¢
Set Key 1
Local AM
Select and press
§OK§
.
a
Press
and
hold
(idle status).
Listening to messages on the answering machine
Prerequisite:
The answering machine is set for fast access on the handset.
Press and
hold
.
The messages are now played back. Hands-free operation is activated. You will
hear the answering machine announcement.
d
If necessary, press the Speaker key to switch it off.
Operating remotely
You can check and activate your answering machine from any other telephone
(hotel, pay phone, etc.).
Prerequisites:
u
You have set a system PIN other than 0000 (
u
The phone you are using for remote operation has tone dialing (DTMF), i.e.
you hear different tones when you press the keys. Alternately, you can use
a code transmitter (available from your cellular phone retailer).
Calling the answering machine and playing back messages
Prerequisite:
Your answering machine is activated.
~
Dial your own number that is assigned to the answering machine
as a receive number.
9 ~
When you hear your announcement, press
9
and enter the system
PIN.
You is informed whether any new messages have been recorded. The messages
are now played back. All messages are played back regardless of their receive
number. After the new messages, the old messages are played back. Finally,
the remaining memory time is specified.
Please note
Remote operation via VoIP connections is possible as long as DTMF signals are
transmitted (depending on the provider) as SIP info messages, audible signals
in the voice channel (inband or audio) or as special RTP data packets (pursuant
to RFC2833).
