Siemens FC7xx Operation Manual Download Page 97

Page: 97 / 184

Operation

Enabling / Disabling Cerberus Remote

97 | 184

Building Technologies

A6V10211076_i_en_--

Fire Safety

2015-12-15

Enabling Cerberus-Remote

↑ License key is installed.

1. Select 'Main menu' > 'Functions'.



The 'Functions' window is open.

2. Select 'Maintenance' and confirm with <ok>.



A list of all element categories on which a command of the 'Maintenance'

command group can be executed is indicated.

3. Select 'Cerberus-Remote'.



The 'Enter address' window is open.

4. Enter the number of the 'Station on which Cerberus-Remote is to be enabled

and confirm with <ok>.



The 'Select command' window is open.

5. Select the 'Enable full access' command and confirm with <ok>.



Enabling for viewing and operating the ↑ 'Station' with Cerberus-Remote is

granted.

Select the 'Enable view access' command and confirm with <ok>.



Enabling for viewing the 'Station' with Cerberus-Remote is granted.

The 'Enable full access' and 'Enable view access' commands cannot be selected

when enabling has already been granted. For the purpose of disabling Cerberus-

Remote, the 'Disable access' command is available instead in the command

section.

Disabling Cerberus-Remote

If Cerberus-Remote is enabled but there is no connection to Cerberus-Remote,

you can inhibit the enable with the 'Disable access' command. Proceed as

described above and select the corresponding command.
If Cerberus-Remote is enabled for operation and the connection to Cerberus-

Remote has been established, each operating attempt on the ↑ 'Station' opens the

following window:

Window to abort the connection with Cerberus-Remote

Cerberus-Rem. operation
Abort Cerberus-Rem. connect.
Exit with <C>
Confirm with <ok>

Press <ok>



Connection with Cerberus-Remote is broken.



Enabling for Cerberus-Remote is disabled.

Summary of Contents for FC7xx

























































































































































































Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands

Siemens FC7xx, Operation Manual

Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands