Operation
Selecting elements or events
5
71 | 184
Building Technologies
A6V10211076_i_en_--
Fire Safety
2015-12-15
5.11.3 Searching for elements
An 'Element search' makes it possible to view the details of an element or to enter
commands applicable to an element.
There are two variants for 'Element search':
● Search by category
● Search by 'Address'
Searching for an element
1. Select 'Main menu' > 'Element search'.
The window to select the search variant is open.
2. Select the search variant and proceed as follows:
● 'Start with category'
First of all, select an element category.
In the 'Enter address' window you have the possibility to enter <ok> without
entering an address. In that case, all elements of this element category are
listed.
When you enter a valid address in the 'Enter address' field, only that element is
listed.
● 'Start with address'
Here you enter a valid address at the beginning. All elements with this address
are listed.
The elements may belong to different element categories such as 'Area' 2,
↑ 'Section' 2, 'Zone' 2, 'Alarming control group' 2 or ↑ 'Fire control group' 2,
after the entry of address 2.
Search by category
The tables below indicate steps of the 'Element search' with 'Start with category':
Main menu
Exit with <C>
Access level 2.1
Message summary
Functions
Favorites
Topology
(1)
(2)
(3)
(4)
Element search
Event memory
Login/logout
Settings/administration
(5)
(6)
(7)
(8)
Function
On/Off
Function
All
LED
test
κ
Select 'Element search', continue with <ok>
Element search
Exit with <C>
Access level 2.1
Start with category
Start with address
(1)
(2)
Function
On/Off
Function
All
LED
test
κ
Select 'Start with category', continue with <ok>
