Operation
Execute commands – Basics
5
63 | 184
Building Technologies
A6V10211076_i_en_--
Fire Safety
2015-12-15
5.10.1 Execute commands – General
Example for the execution of commands
1. Select a command category such as 'Function On/Off' by pressing the <softkey
1> in the 'Main menu' or the 'Functions' main menu item.
The pre-selection restricts the element category selection.
A list of all element categories on which a command of the 'On / Off'
command group can be executed is indicated.
2. Select an element category.
The 'Enter address' window is open.
3. Enter an address or leave the entry field blank and confirm with <ok>.
If no address is entered, all elements of the selected element category are
indicated.
4. In this case, select an element and press the 'Execute Commands' <softkey>.
The 'Select command' window is open.
5. Select a command.
The command is executed.
The tables below indicate the steps described above:
Main menu
Exit with <C>
Access level 2.1
Message
summary
Functions
Favorites
Topology
(1)
(2)
(3)
(4)
Element search
Event memory
Login/logout
Settings/administration
(5)
(6)
(7)
(8)
Function
On/Off
Function
All
LED
test
κ
Press 'Function On/Off' <softkey 1>.
Selecting element category
Area
↑ Section
Zone
Sounder
↑ Fire control group
(1)
(2)
(3)
(4)
(5)
κ
Select for example 'Zone'.
Enter address
Zone ---------
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>
κ
Confirm with <ok> without entering an address.
