Siemens FC7xx Operation Manual Download Page 91

Page: 91 / 184

Operation

Polling reports

91 | 184

Building Technologies

A6V10211076_i_en_--

Fire Safety

2015-12-15

5.15 Polling reports

You can poll the following 'Reports' for the elements ↑ 'Reports', 'Station', 'Module',

or 'Line' in the 'Device' menu:
● 'Report SW version'/software version: Information on all firmware updates is

displayed in the FS720 system. There may be multiple software versions

available for one element.

● 'Report HW version'/hardware version: Information is displayed on the

hardware version, e.g., the hardware version of a detector.

Polling 'Reports' for the ↑ 'Station'

1. Select 'Main menu' > 'Functions' > 'Reports'.



The 'Select element category' window is open.

2. Select 'Station'.
3. Enter the address of the 'Station' and confirm with <ok>.

– or

4. Continue without entering an address and confirm with <ok>.



The 'Select command' window is open.

5. To display the software version, select 'Report SW version'.

– or

6. To display the hardware version, select 'Report HW version'.



The selected 'Reports' are displayed.

7. Optional: To print out the 'Reports', select 'Print report'.

Polling 'Reports' for individual 'Modules'

1. Select 'Main menu' > 'Functions' > 'Reports'.



The 'Select element category' window is open.

2. Select 'Module'.
You then have two options for selecting a 'Module':
● Selecting 'Module' with an address
● Selecting 'Module' from a list (without entering an address)

Selecting 'Module' with an address

1. Enter the address of the ↑ 'Station' and the 'Module' and confirm with <ok>.



The 'Select command' window is open.

2. To display the software version, select 'Report SW version'.

– or

3. To display the hardware version, select 'Report HW version'.



The selected 'Reports' are displayed.

4. Optional: To print out the 'Reports', select 'Print report'.

Summary of Contents for FC7xx

























































































































































































Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands

Siemens FC7xx, Operation Manual

Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands