Siemens DW03500 pureFlow, Instructions For Use Manual, Page: 39 / 202

37
en
Switching the dispensing button lighting
ON/OFF
The dispensing button illumination can also be
switched off to save energy.
Press and hold the selection buttons
■
(Cold
water) and (Hot water) simultaneously for at
least 3 seconds to switch into SET mode.
One of the hot water LEDs briefly lights up and a
signal tone is emitted.
Now press the push-button
■
(child protection).
Child protection LED (25a)
LED does not light Dispensing but-
ton illumination is
switched off
(energy-saving)
LED lights up Dispensing but-
ton illumination is
switched on
To save the setting, press and hold the selection
■
button (Room temperature) for at least three
seconds.
All LEDs light up two-times. The setting has been
saved.
Switching the heating function On/Off
To save energy, the heating function can be
switched off if it is not used.
LED Hot water
Heating function switched off
(energy-saving)
Heating function switched on
To switch off, press and hold the selection but-
■
ton (Hot water) for approx. 3 seconds.
The LED indicator “Hot water” goes out.
To switch it on again, press and hold the selec-
■
tion button (Hot water) for approx. 3 seconds.
Switching the cooling function On/Off
The cold water function can also be switched off to
save energy.
LED Cold water
Cooling function switched off
(energy-saving)
Cooling function switched on
To switch off, press and hold the selection but-
■
ton (Cold water) for approx. 3 seconds.
The LED indicator “Cold water” goes out.
To switch it on again, press and hold the
■
selection button (Cold water) for approx.
3 seconds.
On/Off switch
If the appliance is not to be used for an extended
period of time (vacation), the On/Off switch (14)
should be switched off to save energy.