BANY Agent
28
Compact Operating Instruction
Connecting to the supply voltage (SELV)
The power supply is connected using a 4-pin plug-in terminal block.
The power supply is connected over a high resistance with the enclosure to allow an
undergrounded set up. The two power inputs are non-floating.
Terminal block assignment (4-pin)
Pinout of the safety extra-low voltage (SELV)
Pin number
Assignment (24 VDC)
Labeling
DI/DO
In/Output 24 V DC
SGND
Ground for In/Output
M
Ground power supply
L+
Power, 24 V DC
To wire up the power connector, use a copper cable of category 18 - 12 AWG or cable
with a cross-section of 0.75 to 2.5 mm².
5.3.2 24 V DC – product group BANY Agent
24 V safety extra-low voltage overview
Product group Device:
(Variant)
Safety extra-low voltage (SELV)
BANY
Agent
(mit TAP)
24 V DC
BANY
Agent
(ohne TAP)
24 V DC
Summary of Contents for BANY Agent
