Siemens BANY Agent, Compact Operating Instructions

Page: 22 / 46

BANY Agent 22
Compact Operating Instruction
4.2 Installation options
Installing the BANY Agent
The BANY Agent can be installed in various ways::
Installation on a 35 mm DIN rail
Installation on a SIMATIC S7-300 standard rail
Wall mounting
For the possible types of installation, refer to the section „General Installation“ in this
document.
4.3 General installation
4.3.1 Installation on a DIN rail
CAUTION
If the BANY Agent is liable to be subjected to serve vibration (> 10 g), use an S7-300 standard
rail for installation. The DIN rail does not provide adequate support if vibration exceeds 10 g.
WARNING
When used in shipbuilding, installation on a 35 mm DIN rail is not permitted.
In ships, the 35 mm DIN rail does not provide adequate support.
Valid only for the appropriately marked devices in the various product groups. This is indicated
by a note in the installation options table. Refer to the relevant table in the section Technical
specification (subsection, construction, installation and environment).