Siemens BANY Agent, Compact Operating Instructions

Page: 3 / 46

BANY Agent 3
Compact Operating Instruction
Qualified Personal
The product/system described in this documentation may be operated only by personal
qualified for the specific task in accordance with the relevant documentation, in particular
its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable
of identifying risks and avoiding potential hazards when working with these
products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the
relevant technical documentation. If products and components from other manufacturers are
used, these must be recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are required to ensure that
the products operate safely and without any problem. The permissible ambient conditions must
be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by R are registered trademarks of Siemens AG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their
own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the
hardware and software described. Since variance cannot be precluded entirely, we
cannot guarantee full consistency. However, the information in this publication is
reviewed regularly and any necessary corrections are included in subsequent editions.