Siemens BANY Agent, Compact Operating Instructions

Page: 20 / 46

BANY Agent 20
Compact Operating Instruction
Eingang:
log. 0: contact open or 0V
log. 1: 24V, max. 50mA
Ausgang:
The Output can max drive 50mA.
log. 0: internal 10kOhm resistor against ground
log. 1: Output will be connected to ground by a Phototransistor
3.11 Description of the LEDs
Power (PWR) : Lights up green when the power supply is connected.
Ready (RDY) : Flashes green during startup, when the power is restored or after a reset,
and lights up green when the module is ready.
The module is not ready for use until the StartUP LED lights up.
Control (CTRL) : Lights up green if a link to the network has been established. Flashes
orange at data exchange.
LEDs for Ethernet ports TA1/2, TB1/2, N1, N2 : Lights up green if a 100MBit/s link at the
network has been detected. Flashes orange when data is received.
LEDs for Ethernet ports P1, P2 : Lights up green if a 100MBit/s link at the network has
been detected. Flashes green if a 1GBit/s link has been detected. Flashes orange when
data is received.
3.12 The Buttom
There is a reset button below the USB port.
After a reset, the box is reset and switches to startup mode.
While the startup LED is flashing, the box cannot be accessed from the Web interface or via
BANY Scope.