Siemens BANY Agent, Compact Operating Instructions

Page: 8 / 46

BANY Agent 8
Compact Operating Instruction
2 Safety notes
2.1 Important notes on using the BANY Agent product family
Safety notices on the use of the devices
The following safety notices must be adhered to when setting up and operating the
device and during all associated work such as installation, connecting up, replacing
devices or opening the device.
General information
WARNING
Safety extra low voltage
The equipment is designed for operation with Safety Extra-Low Voltage (SELV) by a Limited
Power Source (LPS). (This does not apply to 100 V … 240 V devices.)
This means that only SELV / LPS (Limited Power Source) complying with IEC 60950-1 /
EN60950-1 / VDE 0805-1 must be connected to the power supply terminals. The power supply
unit for the equipment power supply must comply with NEC Class 2, as described by the
National Electrical Code ® (ANSI / NFPA 70).
There is an additional requirement if devices are operated with a redundant power supply:
If the equipment is connected to a redundant power supply (two separate power supplies), both
must meet these requirements.
WARNING
Opening the device
DO NOT OPEN WHEN ENERGIZED
General notices regarding use in hazardous areas
WARNING
Risk of explosion when connecting or disconnecting the device
EXPLOSION HAZARD
DO NOT CONNECT OR DISCONNECT EQUIPMENT WHEN A FLAMMABLE OR
COMBUSTIBLE ATMOSPHERE IS PRESENT