manualshive.com logo in svg

Siemens 3VA1 100 A, Manual

Share
Download
Siemens 3VA1 100 A Manual Download Page 280

Accessories 

 

4.7 Locking and interlocking 

 

3VA molded case circuit breakers 

280

 

Manual, 04/2015, A5E03603177010-02 

Interlocking of molded case circuit breakers 

 

 

WARNING 

Use of more than one key poses safety hazard and/or risk of damage to property 
Leave only 1 key inserted in one of the circuit breakers included in the interlock 

arrangement. 
Store all other keys in a safe place or lock them away. 

 

In order to ensure reliable functioning of the interlock, only 1 key is left in one circuit breaker 

included in the interlock arrangement. This one key serves as the release instrument for only 

one molded case circuit breaker at a time. 
1.

 

Move all 3VA molded case circuit breakers in the interlock arrangement to the OFF 

position and lock them (turn the cylinder lock to the horizontal "locked" position). 

 

2.

 

Remove all keys. 

 

All 3VA molded case circuit breakers in the interlock arrangement are now safely locked 

in the OFF (O) position and cannot be operated. 

3.

 

Insert one single key in one circuit breaker included in the interlock; store or lock away all 

other keys. 

Summary of Contents for 3VA1 100 A





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands