Siemens 3VA1 100 A Manual Download Page 243

Page: 243 / 532

Accessories

4.5 Manual operators

3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02

243

Procedure
1.

Press the door interlocking pin with a sharp object.

Hold the pin down while the door is opened.

Testing the tripping mechanism

The button <PUSH TO TRIP> can be pressed to perform a function test on the tripping

mechanism.

Procedure

Turn the front mounted rotary operator to position ON (I) in order to close the molded

case circuit breaker.

Press the button <PUSH TO TRIP> with a tool such as a screwdriver.

The front mounted rotary operator moves from position ON (I) to position TRIP. The

molded case circuit breaker is now in the tripped state.

Turn the front mounted rotary operator counter-clockwise to the limit stop (RESET

position, just beyond OFF(O)).

The front mounted rotary operator remains in the OFF (O) position, the molded case

circuit breaker can now be closed again.

Summary of Contents for 3VA1 100 A





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3VA1 100 A

Reviews:

Brands by name

Popular brands

Siemens 3VA1 100 A, Manual

Search results

Summary of Contents for 3VA1 100 A

Reviews:

Brands by name

Popular brands