Siemens Nixdorf RM300 C20, Operating Manual

Page: 20 / 205

10
RM300 C Models U24801-J-Z146-2-7600
2
Important notes
●
When connecting up the system, work in the order described in the section
“Attaching peripherals” on page 37.
●
Systems which comprise a number of cabinets must have a separate fused
socket for each cabinet.
●
The cabinets and directly connected external peripheral devices should be
connected to the same power distributor.
●
Make sure that no objects (such as bracelets or paper clips) or liquids fall into
the device, as this may result in an electric shock or a short circuit.
●
In emergencies (e.g. damage to housings, power cords or controls or ingress
of liquids or foreign bodies), immediately power down the device, pull out the
power plug and notify the SNI service department.
●
Note that proper operation of the system in accordance with IEC 950/EN60950
is guaranteed only if the housing cover is mounted (cooling, fire protection, RFI
suppression).
●
Repairs to the device should only be made by authorized specialists.
Unauthorized opening and inadequate repairs may put the user at consid-
erable risk. Unauthorized opening of devices invalidates the warranty and
excludes Siemens Nixdorf Informationssysteme AG from liability.
●
Before opening the system unit, switch off the device and then pull out the
power plug.
●
Batteries should be replaced by skilled personnel only.
●
When installing and deinstalling peripherals, components and expansion
boards, follow the instructions given in the “RM300 C Series Technical
Manual”.