Siemens Nixdorf RM300 C20, Operating Manual

Page: 36 / 205

26
RM300 C Models U24801-J-Z146-2-7600
4
Installing the system unit
4.2
Connecting up the system unit
Figure 3: Connecting the monitor, keyboard and mouse to the system unit
When you are making the connections between the system unit and the
peripherals, the devices must not be plugged into the power.
All cables and lines must be routed in such a way that no-one can tread
on them or trip over them.
To tighten the securing screws on the cable connectors you will need a small
flathead screwdriver and a small crosspoint screwdriver.
Attaching the mouse
If you want to use your system in full graphics mode you have to connect the mouse.
Ê Plug the round 6-pin connector on the mouse connecting cable into the
matching 6-pin socket on the system unit backplane.
The arrow on the cable connector must be on the right as you push the
connector into the socket.
!