IV319 Rev.00
Data 2010-06-22
Pag. 47 di 118
of the UPS capacity.
10.4 Battery mode / Battery Test mode
The LCD display in Battery mode is shown in the following
diagram. The information about the utility power, the battery, the
UPS output and the load could be displayed. The symbol of
³
´
and
³
´
indicates the UPS is working in battery mode.
When the UPS is running in Battery mode, the buzzer beeps once
every 4 seconds. If the ON button on the front panel is pressed for
more than 1 second again, the buzzer will stop beeping (in silence
mode). Press the ON button once again for more than 1 second to
resume the alarm function.
Battery mode
The display of battery test mode is same as Battery mode.
When the UPS in Line mode, if the ON bottom is pressed the UPS
actives a battery test, it transfers in battery mode for 10sec.
Summary of Contents for Green Point 6 20KVA
Page 28: ...IV319 Rev 00 Data 2010 06 22 Pag 28 di 118 Wiring diagram of 6K 10K 1 1 parallel system...
Page 29: ...IV319 Rev 00 Data 2010 06 22 Pag 29 di 118 Wiring diagram of 10K 3 1 parallel system...
Page 57: ...IV319 Rev 00 Data 2010 06 22 Pag 57 di 118 DB 9 Interface of AS400 communication protocol...
Page 61: ...IV319 Rev 00 Data 2010 06 22 Pag 61 di 118 Back View of 15K 20K 3 1...
