IV319 Rev.00
Data 2010-06-22
Pag. 18 di 118
Indicates the UPS output current value, with
decimal resolution
Load Information
Indicates the load or the UPS output is short and
the UPS would shut down
Indicates the load is over the SPEC range
Indicates the load percent, and the lowest grid
represent 30% load, the two low grids represent
60% load, the three low grids represent 90% load,
all the grids represent 100% load.
Battery Information
Indicates the battery voltage value, which could be
displayed from 0 to 999Vdc
Indicates the battery current value, which could be
displayed from 0 to 999A
Indicates the battery capacitance percent, and
every grid represent 25% capacitance. All the grids
represent 100% capacitance.
Indicates the charger of UPS is working and the
battery is being discharged.
Indicates the charger of UPS is not working.
Indicates the battery is over charged, and the UPS
would be switched to Battery mode
Indicates the battery is weak, and the UPS would
shut down soon
UPS status Information
Indicates the status of the UPS, Fault/Warning
code or the quantity of the parallel system could be
displayed, and the codes are illuminated in detail in
the following chapter
Summary of Contents for Green Point 6 20KVA
Page 28: ...IV319 Rev 00 Data 2010 06 22 Pag 28 di 118 Wiring diagram of 6K 10K 1 1 parallel system...
Page 29: ...IV319 Rev 00 Data 2010 06 22 Pag 29 di 118 Wiring diagram of 10K 3 1 parallel system...
Page 57: ...IV319 Rev 00 Data 2010 06 22 Pag 57 di 118 DB 9 Interface of AS400 communication protocol...
Page 61: ...IV319 Rev 00 Data 2010 06 22 Pag 61 di 118 Back View of 15K 20K 3 1...
