background image

Original operating instructions 

MSA400

03.2015

17

Information concerning product liability

Intended use

Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product and 
its associated components for which our express consent has not been obtained, is strictly prohibited. We accept no liability 
whatsoever for any material losses or injury to people caused by failure to comply with this stipulation.

Product liability

Our products are guaranteed – subject to correct installation and proper use – for a period of one year from the date of 
receipt by a company (according to our general terms and conditions) or as otherwise agreed, and for a period of two years 
for end consumers, in accordance with statutory provisions. As part of our ongoing improvements, we reserve the right to 
replace individual components or entire products. Consequential damages resulting from defects are excluded from the 
warranty within the limits of the law. The warranty shall become void if modifications that are not authorised by us or have not 
been described in this documentation are performed on the product and/or individual components, or if the product and/or 
individual components is/are dismantled or partly dismantled, and the defect is due to the changes made.

Disclaimer of liability

The system and its components are subject to stringent quality controls. As a result, they function reliably and safely when 
used correctly. Our liability for consequential losses and/or claims for damages is excluded, except in the case of wilful 
misconduct or gross negligence, or where we are responsible for injury to life, physical injury or damage to health. Strict 
liability under the German Product Liability Act (Produkthaftungsgesetz) remains unaffected. Liability for the culpable 
violation of significant contractual obligations also remains unaffected; liability in this case is limited to damages that are 
specific to the contract and that could have been foreseen. The above regulations do not imply a change in the burden of 
proof to the detriment of the consumer.

Environmental protection

Although our products do not fall within the scope of the German Electrical and Electronic Equipment Act (ElektroG), 
SIEGENIA will continue to meet the requirements of this Act and will endeavour to completely eliminate the use of substances 
that are hazardous to the environment as soon as this becomes technically feasible. Electrical products should not be 
disposed of as household waste.

Feedback on documentation

We welcome your comments and suggestions on how to improve our documentation. 
Please email your comments to [email protected].

Summary of Contents for MSA400 smart





















Reviews: