10
MSA400
Original operating instructions
03.2015
Operation using operating push button
Opening the sliding sash
›
When the sliding sash is closed and locked, press the operating push button once.
›
The sliding sash is unlocked and opens; the LED lights up green.
1 x
Stopping sliding sash during travel – OPEN or CLOSE direction
›
While the sliding sash is opening, press the operating push button once.
›
The sliding sash stops.
1 x
Opening sliding sash to intermediate position
Note:
The desired intermediate position must be programmed on the MSA400 system before carrying out this function –
see . “Teach in intermediate position” on 14.
›
With the sliding sash closed, press and hold the operating push button for approx. 2 seconds until a short acoustic signal
sounds once.
›
The sliding sash opens up to the intermediate position; the LED lights up green.
ca. 2 Sek.
BEEP
1x
