13
SRV(P)80/185T - SRL(P)80/185T - SRV(P)100/185T
-
SRL(P)100/185T
1.0.5 - Sept. 2014
B- (A1)
+
+
-
Position sensor
Battery
12/24V
Main
Fuse
Main
switch
S-link automatic
version (optional)
M Actuator
B
Controller 150000
M
Thruster
Motor
+12/24V
5A
End terminator 120ohm
Joystick
control panel
PJC 211 (Single thruster)
PJC 212 (Dual thrusters)
for SRV & SRVP
Touch
control panel
8700
for SRV
red
yellow
black
End terminator 120ohm
S-link supply
OPTIONS:
Remote receiver
Input/output
interface
Power
supply
cable
A1
+
D2
D1
A2
C
1
8
+
-
M
1
1
8
6
B+
B
grey
blue
white
1
2
Actuator
red
black
red
blue
Position sensor
Motor
Battery
12/24V
Controller
150000
red
pink
CAN
To S-link
control system
Main fuse
Main switch
S-link automatic
Version (optional)
Technical wiring diagram, SRV/SRL models
Visual wiring diagram, SRV/SRL models
The S-link control system is powered by a dedicated power cable con-
nected to the system backbone as a normal spur cable.
The cable ends connect to battery pos. and battery neg. and the cable
shield connects to battery neg.
The battery pos. must be connected through a 5A fuse.
NO
EN
S-link systemeter strømforsynt via en dediker strømkabel som kobles til
systemets “backbone” som en normal “spur”-kabel.
Kabelendene kobles til batteriets pluss- og minuspol og skjermkabelen
kobles til batteriets minuspol.
Ledningen som kobles til batteriets plusspol må sikres med en 5A sikring.
S-link koblingsskjema
S-link system schematics
