background image

 19

3059

10

2019

-

PJC 221 & 222

AC Thrusters:

Hydraulic Thrusters:

Retractable Thrusters:

DC Thrusters:

Motor temperature indicator.

Hydraulic oil temperature indicator.

Symbol shown when the thruster deploys.

Symbol shown when the thruster retracts.

Symbol shown when the thruster is in position OUT.
When the thruster is deployed and no input is given 

via the joysticks/buttons over a 10 second period, 

the panel will give an audible signal every 10th 

second to tell that the truster is still deployed. 

Battery indicator.

From 8.5V to 12V for 12V thrusters, 

15V to 24V for 24V thrusters

Motor temperature indicator.

From 70°C/ 158°F to 130°C/266°F.

Battery indicator.

From 8.5V to 12V for 12V thrusters, 

15V to 24V for 24V thrusters

Motor temperature indicator.

From 70°C/ 158°F to 130°C/266°F.

Symbol shown when a DC Thruster is

 used in a dual bow or dual stern setup:

Proportional Thruster Display Symbols

EN

MC_0053

Thrust power and direction, Bow thruster(s)

Input from bow joystick on this panel.

The thrust indicator will be shown in this position on a single 

joystick panel if the thruster is defi ned as a bow thruster

Indicating amount of thrust set by other control units in the system, i.e additonal 

PJC panels, 8700 Retract panel, input via 8730 S-link external switch interface, 

S-link remote control etc.

If two or more units are set to run the thruster in 

opposite direction, this information will not be shown.

Thrust power and direction, Stern thruster(s)

Input from stern joystick on this panel

The thrust indicator will be shown in this position on a single joystick panel if the 

thruster is defi ned as a stern thruster.

Proportional Thruster Display

EN

MC_0053

Status indicators for bow 

thruster. (Port bow thruster 

in a dual bow thruster setup).

Runtime indicator will be shown here 

in a single DC  electric bow thruster 

setup.

Status indicators for stern thruster. (Port 

bow thruster in a dual stern thruster 

setup)

Runtime indicator will be shown here 

in a single DC  electric stern thruster 

setup.

Status indicators for starboard 

bow thruster. Only shown in

a dual bow thruster setup. 
Battery indicator will be 

shown here in a single DC

electric bow thruster setup.

Status indicators for starboard 

stern thruster. Only shown in a 

dual stern thruster setup.
Battery indicator will be shown 

here in a single DC electric stern thruster 

setup. 

BOW

STERN

BOW-STB

STERN-STB

Examples of display view for diff erent panels applications:

PJC211:

DC Electric Bow thruster

PJC221:

Hydraulic Bow thruster

PJC221:

AC Electric Bow thruster

PJC212:

DC Electric Bow thruster

DC Electric Stern Thruster

PJC222:

Hydraulic Bow thruster

Hydraulic Stern Thruster

PJC222:

AC Electric Bow thruster

Hydraulic Stern Thruster

PJC211:

DC Electric Stern thruster

PJC212:

Dual DC Electric Bow thrusters

Dual DC Electric Stern thrusters

PJC222: 

Dual Hydraulic Bow thrusters

Dual Hydraulic Stern thrusters

PJC222:

Dual AC Electric Bow thrusters

Dual AC Electric Stern thrusters

PJC221:

Dual AC Electric Bow thrusters

PJC221:

Dual Hydraulic Bow thrusters

PJC221 

 PJC222 

  PJC211 

 PJC212 

 

 

Summary of Contents for S-linkControl Panel PJC221





























Reviews: