12
3059
10
2019
-
PJC 221 & 222
DC System - Automatic Main Switch Setup
DC System - PPC, SR150000, SR61242 Setup
EN
EN
MC_0097
MC_0097
Main Switch
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conventional thruster system. In a system
with two bow or stern thrusters (i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should
be set as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in
display and thruster(s) at the right side of the display.)
PPC - DC Speed Controller PPC520/ PPC820/ PPC840/ PPC800
SR150000 - Control unit for SRV80/SRV100/SRV130/SRV170/SRV210/SRH
SR61242 - Control unit for SR80/SR100
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conventional thruster system. In a system
with two bow or stern thrusters (i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should
be set as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in
display and thruster(s) at the right side of the display.)
Direction
Values: Normal (default)/Inverted
Switches between Normal and Inverted running direction for the thruster
Function
Values: SR(V/L) ON/OFF, SRP, SRVP/SRLP, SEP, SRHP
Setup the control unit behaviour
- SR(V) ON/OFF: Retract thruster (SR6 1242 or SR150000) without speed controller (PPC520, PPC820,
PPC800, PHC-024).
(NB: The joystick needs to be operated more than 50% for the thruster to run.)
- SEP: Tunnel speed thruster, PPC without retract.
- SRP: Retract SR61242 with PPC, both devices needs to be set to SRP.
- SRVP/SRLP: Retract SR150000 with PPC, both devices needs to be set to SRVP/SRLP.
- SRHP/SRAC: PHC or SAC with retract SRHP needs the PHC024 or PHC-3 hydraulic controller.
SRAC needs the PDC-301 SAC controller.
PPC
SR150000
SR61242
PHC 024/
PHC-3
PDC-301
SR(V/L ) ON/OFF
x
x
SRP
x
x
SRVP/SRLP
x
x
SEP
x
SRHP/SRAC
x
x
x
Max output
Values: 50%-100%
(this is only for PPC800 from V1.022 and PPC520/820/840 from V1.008)
Set the maximum output thrust of PPC in percent.
PPC will scale the input signal to this value.
Thermo Switch
Values: Disable (default), Enable
(this is only for PPC520/820/840 from V1.016)
Disable or Enables the thermo switch input on the PPC.
(NB: On PPC520/820/840, if the thermo switch input is closed to 0V at power-up then this function
is automatically set to Enable.)
8.0
8.1
9.0
9.1
9.2
9.3
9.4
9.5
