SICK TRANSIC Extractive TRANSIC151LP, Operating Instructions Manual, Page: 18 / 84

18 8015383/ZUQ7/V1-3/2020-06 | SICK O P E R A T I N G I N S T R U C T I O N S | TRANSIC151LP
Subject to change without notice
3
INSTALLATION
3.1.3 Strong light sources near the oxygen measuring probe
The interfering effect is influenced by:
●
Filter used
●
Light incidence angle into the measuring probe
▸
Use a stainless steel mesh filter for ambient light, e.g., normal interior or laboratory light.
▸
Use a PTFE filter for especially strong light sources, e.g., outdoors with direct sunlight.
3.1.4 Pressure
Observe the specifications on pressure conditions, see “Flange mounted TRANSIC151LP-
A/-F/-G/-H”, page 12 , “TRANSIC151LP-C with sample gas cell and wall bracket”, page 13
and “Pressure suitability”, page 78.
NOTE: Strong light sources interfere with TRANSIC151LP operation
▸
Prevent strong light sources reaching the measuring probe.