10
8015383/ZUQ7/V1-3/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC151LP
Subject to change without notice
1
IMPORTANT INFORMATION
1.3
Responsibility of user
Designated users
All operators of the TRANSIC151LP should be specifically trained on this device,
knowledgeable of relevant regulations, and able to assess potential hazards related to its
operation.
Correct use
▸
Use the device only as described in these Operating Instructions.
The manufacturer bears no responsibility for any other use.
▸
Carry out the specified maintenance work.
▸
Do not remove, add or change any components in or on the device unless such changes
are officially allowed and specified by the manufacturer. Failure to observe these
precautions could result in
– voiding the manufacturer's warranty
– causing the device to become dangerous
Special operating conditions
●
TSA151 Power Supply: Protective Extra Low Voltage (PELV) power supply is required. The
24V inlet of the TSA151 is specified with a fault voltage of Um=60V.
●
The partition wall thickness of the temperature probe is 0.2<t<1 mm. In order to
maintain the zone separation, the temperature probe may not be exposed to corrosive
atmosphere that can endanger zone separation.
●
The service interface with the SICK service interface cable (Part No. 2066710) may only
be used outside the Ex area.
Special local conditions
▸
Follow all local laws, regulations and company policies applicable at the respective instal-
lation location.
Retention of documents
These Operating Instructions:
▸
Must be available for reference.
▸
Must be conveyed to new owners.
▸
Keep passwords in a separate, safe place and secure against unauthorized use.
●
This Manual presumes that the TRANSIC151LP has been delivered as specified
during project planning (i.e., based on the SICK application questionnaire) and the
relevant delivery state of the TRANSIC151LP.
▸
Contact SICK Customer Service if you are not sure whether the TRANSIC151LP
corresponds to the state defined during project planning or to the delivered
system documentation. Please contact SICK Customer Service.