1
ABOUT THIS DOCUMENT
8022483/108R/2018-07-09 | SICK
SAFETY-RELATED 2D LIDAR SENSOR | TIM361S
5
Subject to change without notice
1
About this document
1.1
Function
These operating instructions contain the information required during the life cycle of
the TiM361S safety-related 2D LiDAR sensor (2D laser scanner).
These operating instructions must be made available to everyone who works with this
sensor.
Please read these operating instructions carefully and make sure that you understand
the content fully before working with the sensor.
1.2
Scope
These operating instructions apply to the TiM361S safety-related laser scanner (also
referred to as TiM361S, device or sensor) with part number 1090608 and the
associated safety notes, part number 8018793.
The TiM361S comes with the conformity for use within the scope of application of the
Machinery Directive 2006/42/EC and the associated standards and regulations (see
also chapter 2.5).
1.3
Target groups
These operating instructions are intended for the following target groups: project
developers (planners, developers, designers), installers, electricians, safety experts
(such as CE authorized representatives, compliance officers, people who test and
approve the application), operators, and maintenance personnel.
Commissioning, operation and maintenance.
In many applications, the target groups consist of the manufacturer and the operating
entity of the machine in which the TiM361S is integrated, as follows:
Target group
Specific chapters of these operating
instructions
Manufacturer
Project developers (planners,
developers, designers)
Project planning, page 8
Configuration, page 8
Technical data, page 40
Accessories, page 13
Installers
Electricians
Commissioning , page 18
Safety experts
Project planning, page 8
Configuration, page 8
Commissioning , page 18
Regular thorough checks,
page 38
Technical data, page 40
1
Chapters not listed here are intended for all target groups. All target groups must comply with the safety notes in all of the operating
instructions!
