SICK PLS 10X-317, Operating Manual

Page: 155 / 346

PLS GB
8 009 810/OA87/13-09-04 Operating Instruction
•
PLS © SICK AG
•
Industrial Safety Systems
•
Germany
•
All rights reserved
155
the application, the requirements of which must be checked by
the manufacturer/equipment provider.
This checklist should be preserved or filed with the machine docu-
mentation so that it can be used for reference for the
routine tests.
1. Are the safety regulations based on the directives/
standards applicable to the machinery?
Yes No
2. Are the applied directives and standards listed in the
Declaration of Conformity?
Yes No
3. Does the safety device comply with the required control cate-
gory?
Yes No
4. Is entrance / access to the danger area/zone only possible
through the protective field of the NCSD alone?
Yes No
5. Have measures been taken to prevent unprotected access to
a protected danger area (mechanical point-of-operation guard-
ing) and to monitor this eventuality, and are these measures
safeguarded to prevent their removal?
Yes No
6. Are additional mechanical safety devices installed to prevent
access above, beneath and around the protected area, and
are these secure against manipulation?
Yes No